Management and Provisioning Platform
      Back to home
      1. Help Center
      2. Device Management & Provisioning
      3. Management and Provisioning Platform

      Provisioning Devices in the Managed Provisioning Portal

      This article will provide a walkthrough of the process of Provisioning devices in the Managed Provisioning Portal.

      Zero Touch Made Easier

      bvoip now has integrated the Managed Provisioning Portal to provision and manage devices without going into two portals! For more information on this, please see our Activating the MPP Integration article. 

      After you or your client has been added into the Managed Provisioning Portal, devices will need to be added, assigned and provisioned. 

      Need to Add Your Client?

      Please refer to our articles on adding End Clients and Account Users to your Managed Provisioning Portal access. 

      The Provisioning Process in the Managed Provisioning Portal

      1. Log into the Managed Provisioning Portal. 
      2. Go to the Scan In section. 
      3. Scan-in and Assign the device.
      4. Click on the MAC address. The device details page will open.
      5. Scroll down to the Device Details section.
      6. Locate the Zero Touch Enabled option.
      7. The option will initially state disabled. After 1 minute, refresh the page. The option should then show Zero Touch as Enabled.
      8. Once the device shows as Enabled, the phone should reboot. If it doesn't, you can elect to manually reboot the phone. The phone should then be provisioned and ready for test calling. 

      Phone Isn't Provisioned?

      If the phone is not provisioning after the above steps, we recommend referring to the Check the URL in the Phone's Web Server section of the Phone Provisioning Troubleshooting Guide.