Snom

Manually Provisioning Snom Phones

This article will provide a walkthrough on how to manually provision snom based phones with the bvoip phone system.

Manual Provisioning Notice

Manually provisioning a phone should only be done if the device model is incompatible with the Managed Provisioning Portal. If there is question about whether or not the desired phone is able to be provisioned with the MPP Integration, please contact our support team. 

Why Manually Provision? 

Manual provisioning of the phone should not be required if you have successfully provisioned the phone using the Provisioning Snom Phones article

Pre-Provisioning Checkpoint

In order to manually provision a phone that is not compatible with the MPP Integration, it must be factory reset and the phone template will need to be set in the bvoip phone system.

For information on how to complete these tasks, please see the articles below. 

Accessing the Snom GUI

To access the web interface, you will need to retrieve the device's local IP and paste it into a web browser. The username and password should both be admin to access the web interface. 

Manually Provisioning Snom Phones

  1. Go to the Setup Menu.
  2. Select the Advanced section. 
  3. Go to the Update tab. 
  4. Confirm that the URL reflects a centralportal.net based URL.
  5. Click the Apply button.
  6. Click the Reboot button. SnomProv1

The phone will then reboot twice, once for a firmware check and the second to complete the provisioning process.  After the reboot, the phone will be setup fully so that not just calls can be setup, but also BLF keys will function as assigned in the phone system.

Provisioned and Getting a Login Screen?

If you have completed the provisioning process and the phone is prompting you with a sign on screen, try factory resetting the device.

Phone Still Not Provisioned?

If the phone has not provisioned with either sets of instructions, please refer to our Phone Provisioning Troubleshoot Guide.